TS-150 Description The  TS-150  combines proven technical excellence with elegant and user friendly design The  isolation of the  TS 150 begins at 0,7 Hz,  increasing rapidly to 40db beyond 10Hz The lack of any low frequency resonance means much better performance than with most common passive air damping approaches The inherent stiffness of the  TS systems imparts excellent directional+positional stability The outstanding performance of the TS 150 includes all six translational and rotational vibration modes The precise load-independend automatic height adjustment mechanism stabilizes the top plate at an optimized working level even after major changes of load A remote control allows the isolation  to be switched  “ON” and “OFF” externally   Frequency Load range Dimensions 0,7 - 1000 Hz 0    -   150 kg400 x 450 x 78.5 mm The  TS-150  combines proven technical excellence with elegant and user friendly design The  isolation of the  TS 150 begins at 0,7 Hz,  increasing rapidly to 40db beyond 10Hz The lack of any low frequency resonance means much better performance than with most common passive air damping approaches The inherent stiffness of the  TS systems imparts excellent directional+positional stability The outstanding performance of the TS 150 includes all six translational and rotational vibration modes The precise load-independend automatic height adjustment mechanism stabilizes the top plate at an optimized working level even after major changes of load A remote control allows the isolation  to be switched  “ON” and “OFF” externally User friendly, practical handling advantages are the result of an innovative construction concept Height of TS-150 only 78.5 mm Weight of TS-150 only 17.5 kg Technical Specifications Isolation: dynamic 0,7Hz to 1 kHz passive beyond 1 kHz Transmissibility: see attached curve   Above 10 Hz trans- missibility < 0,01 (-40dB) Correction Forces: +/- 8 N vertical +/- 4 N horizontal Static Compliance: approx. 12 ?m/N vertical approx. 30-40 ?m/N horizontal Maximum Load: 150 kg Size: 400 x 450 x 78.5 mm Weight: 17,5 kg Electrical   Safety class: 1 Power Consumption: maximum 10W 20W during load adjustment  Input Voltage: 115 - 230 V  AC +/- 10% 50 - 60 Hz Overload: The display indicates when the load is too heavy or severely unbalanced Monitor signal: A multiplexed signal for display on oscilloscope shows vibration levels with and without isolation - for diagnostic purposes only Front panel Display menu: Instrumental status accessible by scrolling: - height adjustment - isolation ON / OFF          - overload - transportation locking - technical hot-line Table top   Size: 400 x 450 mm Material: Damped Aluminium sandwich construction Also available with tapped M6 on 25mm centres or customised Download attachments: Manual TS-150+140 LP V2.pdf Image Gallery