The  TS-150  combines proven technical excellence with elegant and user friendly design

The lack of any low frequency resonance means much better performance than with most common passive air damping approaches

 

• The inherent stiffness of the  TS systems imparts excellent directional+positional stability
• The outstanding performance of the TS 150 includes all six translational and rotational vibration modes
• The precise load-independend automatic height adjustment mechanism stabilizes the top plate at an optimized working level even after major changes of load
• A remote control allows the isolation  to be switched  “ON” and “OFF” externally

Technical Specifications
Frequency	0.7 to 300 Hz (active isolation), passive above 300 Hz
Load range	0 - 150 kg
Dimensions	400 x 450 x 78.5 mm
Weight	17.5 kg
Isolation	dynamic 0.7 Hz to 300 Hz passive beyond 300 Hz
Transmissibility	Above 10 Hz transmissibility < 0,01 (-40db)
Correction Forces	Horizontal +/- 4 N, vertical +/- 8 N
Static Compliance	approx. 12 um/N vertical and 30-40 um/N horizontal
Safety class	1
Power Consumption	max 10W, 20W during load adjustment
Input Voltage	110-230VAC  +/- 10% , 50 - 60 Hz
Overload	The display indicates when the load is too heavy or severely unbalanced
Monitor signal	A multiplexed signal for display on oscilloscope shows vibration levels with and without isolation - For diagnostic purpose only -
제품 사양
주파수	0.7 - 300 Hz
하중 범위	0  -  150 kg
제품 크기	400 x 450 x 78.5 mm
제진 방식	0.7Hz~300Hz 범위 능동 제진 / 300Hz 이상 수동 제진
전달률	10Hz 이상에서 전달률 < 0.017 (-35dB)
보정력	수평 최대 +/- 4N / 수직 +/- 8N
정적 컴플라이언스	수직 약 12 um/N, 수평 약 30-40 um/N
안전 등급	class 1
소비 전력	통상 18W
입력 전압	110-230VAC  (±10%, 50-60Hz)
과부하 알림	중 초과 및 심한 불균형 발생 시 디스플레이에 상태 표시
모니터 신호	오실로스코프 연결 시 차단 전후의 정밀 비교 신호 출력 (진단용)